Tapo (Rust/Python library) now speaks TP-Link's TPAP protocol

Author here. tapo is an unofficial Rust client library for TP-Link Tapo devices (plugs, lights, hubs, cameras), with a Python wrapper built on the same crate. It is not affiliated with TP-Link. The short version: since late 2025, firmware updates have made Tapo devices refuse third-party clients unless you turn on a "Third-Party Compatibility" switch in the Tapo app. The switch works by bringing back the older login, KLAP. With it off, devices speak an undocumented protocol called TPAP, which logs in with SPAKE2+ (RFC 9383). The library now speaks TPAP, so the switch can stay off. The part I found most interesting is the security difference. A recorded KLAP login can be used to test password guesses offline. With SPAKE2+ it can't, and learning the password later doesn't decrypt sessions captured earlier. So the "compatibility" switch is really a security downgrade, and TP-Link's own FAQ says enabling it "may reduce the security of your devices". Not everything works with the switch off yet: some cameras, such as a C210 on firmware 1.5.2, still need it on. Happy to answer questions about the protocol work or the library.

• mindslight · 20 hours ago

  I have a handful of old TP-Link wifi switch devices, but I haven't kept up on the play by play developments. I just know at some point newer ones stopped working with that access method (and I haven't bought any since). Is KLAP that old local-network UDP protocol with "XOR encryption" ? Or is that something else? Does using TPAP with your library still require connecting the devices to their "cloud" (warning: surveillance!) ? Or does your library effectively restore the local-only workflow of never allowing the devices Internet access, and controlling them locally ?

  • tecleandor · 19 hours ago

    Note that KLAP, afaik, is only for the TAPO range of devices. Those are mostly cameras, doorbells, sensors, robot vacuums, and the like.

    • faithraven · 19 hours ago

      And plugs. Don't forget the plugs! Everyone loves their smart plugs :)

  • faithraven · 19 hours ago

    That XOR protocol is a different one, and older than anything in the article. It is the original TP-Link Smart Home protocol used by the Kasa line (HS100, HS110 and similar): JSON on port 9999, obfuscated with an XOR autokey cipher, with no authentication at all. Tapo devices never spoke it. Their original protocol was an AES passthrough over HTTP, KLAP replaced that in 2023, and TPAP is the newest. As far as I know, newer Kasa hardware and firmware moved to KLAP as well, which would explain why your access method stopped working on the newer ones. My library only covers Tapo devices; for Kasa, python-kasa is the one to look at. On the cloud: the devices do have to be set up through the phone app with a TP-Link cloud account. Once set up, though, most functions of most devices can be used locally through the library, with neither the devices nor the library having internet access. The main catch is credentials: if you change the account password, for example, the devices need to be online for a little while to pick up the new one.

    • mindslight · 15 hours ago

      Ah, okay. Thanks for the clarification. I actually do have some Tapo cameras as well - being used with the official cloud service, subscription fee and all - because they solve a problem (and aren't observing my day to day life). So if/when I end up taking over digital ownership of those, I look forward to using your library.

• tclancy · 20 hours ago

  This is awesome, thanks for the work. I wish I'd come across it sooner.

• the-grump · 19 hours ago

  One thing to keep an eye out for is a communication from TP link telling you to stop using their name. Great work!

• sslalready · 17 hours ago

  Awesome work. Here is hope this will also help improve local access to Tapo devices in Home Assistant.

• egwor · 16 hours ago

  I've built the same code but in swift. I've come to the exact same conclusions that you have on the protocol. I got Claude Code to implement TPAP compatibility solely by interacting with my local plugs, looking at the shape of responses and RFC 9383 to figure out it was SPAKE2+. It took a bit of time to figure out the last bit: that the SHA-1 of the password, then PBKDF2 with the plug's salt, split into two halves; a context of "PAKE V1" plus both sides' random numbers; empty identities

• tomhow · 16 hours ago

  We appreciate you posting your work and engaging in the discussion. But it's a no-no on HN to post comments that are generated (including polished or translated) by LLMs or other text-generation tools. See https://news.ycombinator.com/newsguidelines.html#generated and https://news.ycombinator.com/item?id=47340079 . Please write all comments by hand, from your own thoughts, and resist the temptation to copy+paste anything from a chatbot or translation tool.

  • mindcrime · 16 hours ago

    Totally AI-generated, sure. But saying "No AI edits" at all is going way too far, IMO. Taken to its logical extreme, that even bans using a spell-checker. And what about non native English speakers? Is it really wrong for them to use a translation tool so they can participate? I mean, it's y'all's site, you can do what you want. But FWIW, I think making that too much of an absolute "bright line" is a net negative for HN.

    • tomhow · 15 hours ago

      > to its logical extreme, that even bans using a spell-checker But we're not taking it to that extreme. We're fine with using LLMs for checking of spelling and grammar, and for suggesting improvements to text you've authored yourself, and then using your own human judgement to apply the changes back into your text. What we are saying is: don't copy+paste something from an LLM chatbot or translation tool into the Hacker News comment box and submit it. > making that too much of an absolute "bright line" is a net negative for HN What matters is the outcome. HN is for thoughtful conversation between humans, and that's what people expect when they come here. If regular HN users have that unpleasant sensation that comes upon realizing that what you're reading was generated by a machine rather than being authored by a thoughtful human, the commenter made a negative contribution to HN.

  • bonoboTP · 15 hours ago

    The article is also AI, I recognize its style from a mile away. I don't mind it super much when it's yapping like this about what it did for the tasks that I myself gave it, but I don't enjoy it for reading pleasure on the off-times.

• koyote · 15 hours ago

  Great work! I assume because it has Python wrapper, the HomeAsstant integration can make use of it soon?

  • faithraven · 5 hours ago

    Indeed! I don't maintain a Home Assistant integration myself, but anyone who does can leverage this library, and anyone who wants to start a new one is welcome to.

I was always taught: Read good books, that's how you'll write. I don't even really care AI or human if its written like this. I would rather do anything else than continue reading.

• IshKebab · 21 hours ago

  Hard to disagree. I'm interested, but... the writing sucks. And there's no excuse now anyway the latest Opus/Astra models are actually tolerable. Use those if you must.

  • faithraven · 21 hours ago

    I did my best with the writing, but it clearly didn't land for the two of you. Could you point to one thing, or one pattern, that bothered you most? That would help me improve it.

    • ssl-3 · 16 hours ago

      [edited out snipes]

      • gfody · 16 hours ago

        this is an interesting specimen. vitriol is off the charts even for a solicited critique - I suspect here is a case where the pangram verdict is acting as a sort of license for the critic to treat the author as subhuman

        • the-grump · 15 hours ago

          @dang I don't know if there's anything you do about people being pricks for no reason like they are above in this thread.

    • mplewis · 16 hours ago

      Did you do your best? I think you can do better.

  • nicce · 20 hours ago

    The point of the writing is thinking what you are about to say from difference perspectives. Now, everything gets average and boring if LLMs are getting used all the time. And they still waste so many words that don't benefit reader in any way.

  • kurthr · 19 hours ago

    I'm thinking it might be ESL and/or translated, but I could be wrong. There are posts from 2022, but they seem a lot more terse. Not being able to effectively proofread will make slop even sloppier.

• the-grump · 19 hours ago

  Were you not also taught to "say something nice or nothing at all?" There's no reason to be this nasty. If you don't like the writing, skip the post. For what it's worth, the writing is clear and it gets the point across. OP, thank you for doing the work and for sharing it.

  • cute_boi · 18 hours ago

    How is he being nasty? I can bet author didn't even read his own AI generated text.... I don't have any issue with AI, but it would be nice if people spend time over creating quality stuff.

    • faithraven · 18 hours ago

      Sorry to disappoint, but I did. Multiple times, across multiple days.

    • the-grump · 15 hours ago

      You don't see how it's nasty, and then you pile your own nastiness on top. Get a life and read something you want to read instead of spilling your bile on somebody sharing their work.

      • ltbarcly3 · 14 hours ago

        Does it give you some kind of sense of accomplishment to lecture and shame people (who have no interest in your opinion) over their very mild critiques of AI writing style? If you are going to be 'the-grump' you should find something interesting to be grumpy about, nobody wants to hear your "everyone should be nice all the time except me" horse crap. If it isn't intentional trolling you have next to zero insight into what you are actually doing.

        • the-grump · 8 hours ago

          And who has an interest in your opinion, pray tell. I'll dish it out and dish it back, but I'll never talk down to someone because I don't like how they write or their method of solving problems. We are not all born with the same gifts (or with English as our native tongue). That's what some here don't seem to understand, that there's a way to put things gently when you're addressing someone to their (virtual) face.

          • ltbarcly3 · 5 hours ago

            I wrote a mean response, but let me just say you are being overwhelmingly condescending starting with your initial response. I will give you the benefit of the doubt and assume you don't know you are talking down to people, but you opened the door when you claim you did not talk down to them despite that being your primary interaction style. I encourage you to use AI to help edit your responses in the future if you are actually not aware of this. I pasted it into chatgpt with the prompt "analyze the tone of the-grump and check for condescending language and tone. give examples if any." and here is what it says: Yes, several of the-grump's comments read as condescending. Defending the author from harsh criticism is reasonable, but some of the language used in that defense also talks down to others. Were you not also taught to "say something nice or nothing at all?" This is the clearest example. Invoking a childhood manners lesson positions the other person as someone who needs basic correction. You don't see how it's nasty, and then you pile your own nastiness on top. This is scolding. It treats disagreement as a failure to recognize something obvious, rather than explaining which wording crossed a line. Get a life ... instead of spilling your bile on somebody sharing their work. This is primarily insulting and contemptuous. Hostility is clearer here than condescension specifically. And who has an interest in your opinion, pray tell. This is sarcastic and dismissive. "Pray tell" adds a mocking, superior tone, although the remark also echoes the preceding commenter's dismissal of the-grump's opinion. That's what some here don't seem to understand, that there's a way to put things gently... This presents others as lacking basic interpersonal understanding while placing the speaker in the role of teaching it.

• altmanaltman · 18 hours ago

  What do you think is bad about the writing? It seems fine to me. What do you mean by "written like this "? What is this ?

  • ptx · 18 hours ago

    The disclaimer at the end of the article says AI was used to "polish" the writing. I would guess it's this polish that can be a little off-putting: It reads like a magazine article written by and for people who aren't particularly interested in the topic.

  • lmz · 17 hours ago

    It's written like one of those long form magazine articles. Which is fine for that kind of thing but maybe not great for software release notes. It goes buildup buildup buildup ... underwhelming payoff.

  • coldtea · 3 hours ago

    It's bad at some many levels - but it's also a case of if you know, you know. There no universal "KPIs" one can check to say it's good or bad. But it's full on the "AI slop" style, a mix of LinkedIn/Online Marketing/Listicle like writing. That it's part of hundreds of thousands of articles, all with the same mechanical style, makes it even more tedious than if it was just some individual blog post here and there. "Set the scene" paragraphs to add suspense, repeated lists of three or more items, "and, honestly"/"does real load-bearing work" and phrases like this, mic drops after every few paragraphs, writing about mundane stuff like a marketing executive, the list goes on. This one isn't even one of the really eggregious examples.

• RockRobotRock · 15 hours ago

  Yeah. I read the first 5 paragraphs, and that's as far as I could get. "At least nine issues tell the same story" "every change lands in both at once" It's Claudlish, so of course a community full of people who spend lots of time talking to Claude would notice this.

since GLM 5.2 (perhaps even earlier?) it has been remarkably easy to reverse engineer any closed protocol you want as long as you have a binary. previously, it required so much manual effort as to simply not be worth it 95% of the time. now all you need is IDA or Ghidra MCP, a binary and some vague sloppy instructions. some more recent models even started instrumenting a running binary (when possible) to enumerate the protocol without being explicitly instructed to, which is even better.

• faithraven · 20 hours ago

  Without admitting to anything, I was surprised by how little time it took to add support for the new protocol to the library. And I didn't even need an MCP server.

• Retr0id · 20 hours ago

  You don't even need an MCP, I just let the agent write scripts for headless ghidra. The MCPs are fragile and there isn't a whole lot of knowledge about how to use them in the training datasets, whereas there are plenty of ghidra scripts (and proper docs for the APIs).

  • teravor · 20 hours ago

    > there isn't a whole lot of knowledge about how to use them in the training datasets if you include a SKILL.md for the MCP (or just dump it into the prompt) it's not a problem. I don't use Ghidra but IDA Pro MCP works extremely well for me for all manner of tasks. for example, some software likes to call home for license checking (and I wish to run it with networking denied to it). it no longer does.

    • Retr0id · 20 hours ago

      Sure, you can do that, but in my experience it's usually best to let agents do the things they already know how to do.

    • bri3d · 19 hours ago

      The IDA Pro MCP is substantially better than the most popular Ghidra MCP, for what it's worth.

  • bri3d · 19 hours ago

    I agree! Don't give it away! Seriously, though, the popular Ghidra MCP is really badly architected; it's way better to rearchitect it or just script Ghidra directly. With that said, Opus 5.5 seems to have been trained on CoT from the popular Ghidra MCP. This makes it work better, but also makes it even more inefficient if you modify the MCP without changing its name and shape significantly (it will try to make tool calls using the "mainline" format, then have to retry them when they fail). Even with Opus 5.5, IMO it's better to just ditch the MCP and let the LLMs eat with bintools and headless Ghidra; with both GLM and Opus this produces significantly more efficient results than the popular MCP. On the other hand the IDA Pro MCP is much better architected and seems to be pretty good.

    • cute_boi · 18 hours ago

      Will opus 5.5 even reverse engineer binaries? I get instant blocks when it sees word like decompile etc..

      • Retr0id · 16 hours ago

        It depends on what you're reversing. It tends not to like DRM-shaped things or security-sensitive things (for a very vague definition of "security-sensitive"), but e.g. game engines are fine. (For the things it doesn't like, dropping down to Opus 4.8 or 4.6 usually works)

      • charcircuit · 15 hours ago

        Works fine for me. I didn't explicitly say decompile but it had no issue digging into executables to give me information on how it and various file formats were designed.

      • TeMPOraL · 15 hours ago

        Reversed an old video game pretty extensively for me. Got it running in 30 minutes, then patched some bugs, reversed the entire game logic VM and rendering pipeline, and we're now in process of expressing game logic as Lisp and upscaling assets for rendered that it already made to operate at 4x its hardcoded resolution... Starting point was literally original installer copied over from a CD, which I hold on to and dug up from an old hard drive, plus a short prompt asking to make it work. Installing Ghirda and developing a whole framework for patching the binary, as well as substituting DirectDraw with its own DLL shim, was Claude's own invention.

    • Avamander · 14 hours ago

      I will note that Opus 4.8 and below was unable to use the MCP very well, misused it really often even with instructing. Good to see that they have improved some things.

• thedougd · 18 hours ago

  I've had good luck aiming for easier targets. Android APKs, Java, and .NET binaries are usually easy to reverse engineer with AI and without any advanced tooling.

I feel like I'm either too dumb to get this, or not the target audience. I don't know what a Tapo is, but it's apparently a library to interact with Tapo devices, whatever that might be. And now it can talk TPAP, whatever that is. TP-Link is mentioned, so I'll guess Routers and move on :)

• john_strinlai · 19 hours ago

  https://www.tapo.com/us/ > Tapo is a brand of TP-Link that offers smart home solutions, such as security cameras, plugs, bulbs, switches, and more. and TPAP is the "TP-Link Authentication Protocol" which, i believe, is based on 802.1X ( https://en.wikipedia.org/wiki/IEEE_802.1X )

• altmanaltman · 18 hours ago

  Tapo devices are basically smart home stuff. You normally have to use their ecosystem to control those devices, i.e. use their apps etc. However, people do not like the fact that you're locked in those apps and want to use those devices via platforms like Homeassistant, so people figure out how to do it by tricks like this.

  • originalvichy · 17 hours ago

    They’re also a cheap way to get into BirdNET and Apple HomeKit Secure Video if you get their cheapest security cams that have some weather proofing. You can get a microphone (and camera) outdoors without having to shell out a lot of money for a Raspberry Pi + microphone + all the protective casing required to keep it from breaking. With software like Scrypted or Frigate, I was able to use an Apple TV 4K to get a security feed into my Apple Home with iCloud+. You don’t need to buy Homekit certified product.

  • dawnerd · 16 hours ago

    They're also really cheap energy monitoring plugs, probably the cheapest from a known brand you can get. I also really like their light switches and they work great in HA. FWIW I also have them completely locked down on the network like all other IOT devices.

Reads like AI slop.

• ltbarcly3 · 14 hours ago

  AI is still contributing far more to this discussion than you are.

  • cromka · 12 hours ago

    These comments should be barred from HN, just like "HN is turning into Reddit" is. Which is quite ironic, because the ubiquitous, reductive, low-effort "AI slop" comments make Reddit super annoying.

We should encourage each other to divest from hardware suppliers who are unfriendly to it's users. TP-Link should be publishing specifications to make it as easy as possible to interact with the hardware you purchase, not trying to maximize lock in or force you into a closed ecosystem. The transaction should be you give them money, they give you hardware and as much information as they reasonably can to use it effectively and safely, repair it later if necessary, etc. We have become used to having to take whatever we get as though consumers have no power in the market. Stop buying TP-Link hardware until they treat us as paying customers. Encourage other people to stop also. Don't buy hardware from manufacturers who treat you like crap, and don't participate in attempts to 'make it work' by reverse engineering it while they release firmware to break those attempts again and again. Stop funding your own opposition!